Products

TermoSense® products for monitoring temperatures, humidity, fluid levels, lighting, refrigeration compressors, vehicle heating, and more.

The products have durable surface mounted microprocessor-based electronics and communicate with a license-free low-power radio, compatible with the industrial wireless control system RadioPLC®.

Product categories:

Want to know more? > Contact us!

Sensors

Temp3Tx - Temperature sensor

Function
Continuous temperature measurement with high accuracy (every 50-70 seconds). Significant changes are reported immediately. Manual readings and registrations can be done with a patented non-contact activation key.

Technical specification
Measured value, temp: -30 to 100 ° C, resolution 0.1 ° C, inaccuracy 0.2 ° C.
Design: With display for manual reading option on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-54. Waterproof option IP-68, for kitchen and food production applications.
Size:  79x117x24 mm

upp

HumTx - Humidity and temperature sensor.

Function
Wireless sensor that measures moisture and temperatures with high accuracy. Especially suited for continuous monitoring of environmental conditions around fruit & vegetable products in grocery stores, which increases the life span considerably and reduces wastage. Alarms for faulty conditions. Manual readings and registrations can be done with a patented non-contact activation key.

Technical specification
Measured value, RH: 0-100% RH, with detection and indication of condensation. Withstands 100% humidity and even condensate and liquid supplement without residual degradation. 3% RH long-term stability (12 months), upon calibration.
Measured value, temp: -30 to 100 ° C, resolution 0.1 ° C, inaccuracy 0.2 ° C.
Design: With display for manual reading option on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-54. Waterproof option IP-68, for kitchen and food production applications.
Size:  79x117x24 mm

Temp3Tx Ext - External temperature sensing

Function
Temperature sensing with external sensor body. Measurement takes place continuously and with high accuracy (every 50-70 seconds). Significant changes are reported immediately. Manual readings and registrations can be done with a patented non-contact activation key.

Technical specification
Design: With display for manual reading option on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-54. Waterproof option IP-68.
Size: 79x117x24 mm

upp

Temp3Tx Ext3 -External temperature sensing x 3

Function
External temperature sensing with three connections. Measurement takes place continuously and with high accuracy (every 50-70 seconds). Significant changes are reported immediately. Manual readings and registrations can be done with a patented non-contact activation key.

Technical specification
Design: With display for manual reading option on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-54. Waterproof option IP-68.
Size: 79x117x24 mm

upp

Temp3Tx Ext3 HD -External temperature sensing x 3

Function
External temperature sensing with three connections. Measurement takes place continuously and with high accuracy (every 50-70 seconds). Significant changes are reported immediately. Manual readings and registrations can be done with a patented non-contact activation key. Protection for industrial environments.

Technical specification
Design: With display for manual reading option on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-54. Waterproof option IP-68.
Size: 125x125x35 mm

upp

Comp3Tx - Compressor-sensor

Function
Records and analyzes operational data and warns of overload. The sensor is used, among other things, to monitor compressors in refrigerators and freezers, which provides an early indication of deteriorated cooling capacity (even when the cabinet at the moment is able to maintain the correct temperature).

Technical specification
Design: With display for manual reading option on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-54. Waterproof option IP-68.
Size: 79x117x24 mm

upp

LevelTx - Level sensor for liquid.

Function
Continuously monitors, records and registers fluid levels and provides SMS alarms in faulty conditions. The sensor also monitors itself and the communication. It comes complete with sensor rod or measuring ladder.
- Sensor rod is used to measure levels in oil separators, grease separators, chemical droplets, or water at the bottom of gasoline / diesel tanks.
- Measuring ladder is advantageously used in closed tanks/environmental tanks and can measure the level of aggressive chemicals.

Technical specification
Design: Communicates wirelessly and also has a display for manual reading on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-68, waterproof.
Size of enclosure: 79x117x24 mm
Sensor rod: Length = 550 mm
Measuring ladder: Height dimensions adapted to the tank and displays the filling level 0-100%. Liquid amount can be calculated if the tank is uniform in height.

Download
> Level sensor with measuring ladder (PDF 1,4 MB)

upp

EchoTxCam - Level sensor for sludge

Function
Measures sludge level. (under development)

Technical specification
With camlock coupling.
Design: With display for manual reading option on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-67/68.
Size of enclosure: 79x117x24 mm

upp

ProbTx - Temperature control during in or outbound delivery

Function
A simple control tool for measuring and logging commodity temperatures during in or outbound delivery. Entries are directly and wirelessly stored in a table corresponding to the respective supplier.

Technical specification
Measured value, temp: -30 to 100 ° C, resolution 0.1 ° C, inaccuracy 0.2 ° C.
Protection: IP-54. Waterproof option IP-68, for kitchen and food production applications.
Size: 79x117x24 mm

upp

Ramp units

RampRxIR, 400VAC - Relay controller with IR communication

Function
Control the heat maintained in vehicles, for example buses at bus heating ramps, and shows also the location where the bus is parked. Communicates via infrared with the vehicle-mounted TempCTL.

Technical specification
Designed for voltage 400VAC three phase.
Protection: IP-66/67
Size: communication unit 160x120x90 mm, total incl. Connection unit 160x300x250 mm

upp

RampRxIR, 230VAC single phase - Relay controller with IR communication

Function
Control the heat maintained in vehicles, for example buses at bus heating ramps, and shows also the location where the bus is parked. Communicates via infrared with the vehicle-mounted TempCTL.

Technical specification
Designed for voltage 230VAC single phase.
Protection: IP-66/67
Size: communication unit 160x120x90 mm

upp

U01 - Plate with ramps

Function
For acknowledgment at the exit that the vehicle leaves the depot. Fixed U01 communicates via infrared with the vehicle mounted TempCTL.

Technical specification
Protection: IP-66/67
Size: communication unit 160x120x90 mm

upp

TempCTL - Temperature sensor/control unit using infrared communication.

Function
Vehicle-mounted sensor for controlling heat maintained in vehicles. Communicates with the ramp-mounted RampRxIR via IR heating control. Also communicates with the base station via radio to inform which ramp it has been contacted with - position determination.

Technical specification
Size: 160x94x32 mm

upp

Temp3Tx Ext3 -External temperature sensing x 3

Function
External temperature sensing with three connections. Measurement takes place continuously and with high accuracy (every 50-70 seconds). Significant changes are reported immediately. Manual readings and registrations can be done with a patented non-contact activation key.

Technical specification
Design: With display for manual reading option on site.
Operation: With patented non-contact activation key.
Expected battery life: Up to 17 years. Intelligent battery saving technology - the battery is used only when significant changes occur.
Protection: IP-54. Waterproof option IP-68.
Size: 79x117x24 mm

upp

KeyTx, Bus Tool - Wireless control and test tool

Function
Bus Tool is a tool for controlling and verifying the temperature control of deployed buses. The operation is wireless, and takes place outside the bus.

Control/reading: Stand infant of the bus and direct the Bus Tool towards the windshield and the bus's temperature control unit (TempCTL). Press the button (s) for the test or control function and read the result in the TempCTL display.

Control Features:

  • On, prepare for release, full heat
  • Aut, manual return to automatic
  • Off, weekend shutdown of buses.
  • On ... Aut, to check the operation of the circulating pump and flow.

Test Features:

  • Signal Quality?
  • The temperature in the bus?
  • The bus's battery voltage?
  • Heat, on or off?
  • Sensor software version?
  • Keying temperature sensor!
  • Presumed ramp place?

Technical specification
Radio frequency: 433.920 MHz
Protection: IP-65
Size: 63x140x30 mm

Download
> Instruction for Bus Tool (PDF 1.9 MB)

upp

Central units

Mini Basestation

Function
The base station continuously receives measurement values from up to 60 sensors, monitors and generates alarms. The values are passed over the Internet to the operational server (TSI), via LAN or built-in mobile network router (optional). The base station always contains the current measured values and gives local alarm with flashing light and beeping sound. The alarms can also be sent as SMS. The base station also sends alarms to local alarm receivers that can be placed in counter, expedition, or at the alarm central unit.

Technical specification
Alarm: A and B alarms, alarm acknowledgment button, scroll up/down in the alarm table.
Operations: With touch-free activation key to "unlock". With buttons for displaying measured values and adjusting alarm limits.
Indicators: LEDs and display which together provide information about measurements, alarms, communication status, and more.
Size: 240x160x100, weight 1.16 kg, "lugs" for wall mounting.
Protection: IP-21
Antenna: BNC connector, the standard antenna is possible to switch to amplifying base station antenna.

upp

Rp - Repeater

Function
Forward signals from sensors to receivers, for extended range. With several repeaters, the range is extended even more.

Technical specification
Design: With display that shows conveyed messages and radio quality.
Antenna: BNC connector, standard antenna, switchable to amplifying antenna.
Size: 94x160x31,5 mm
UPS-batteri: Integrerad, 9 volt nickel metal hybride.
Power failure time: More than one hour.
Operation: With contact-free activation key for:
- Opening for acceptance of new sensors.
- Linking to receiver/next repeater.
- Testing the radio quality.

upp

LarmRx - Alarm receiver

Function
The alarm receiver picks up alarms from the TermoSense system and displays them at the desired location, for example at a manned cash register. If alarms are to be connected to a burglar alarm, an alarm receiver can be set at the control panel and connected. All signaling takes place wirelessly and the installation is therefore simple.

Technical specification
Design: With flashlight, sound indication, display and integrated UPS battery.
Antenna: BNC connector, standard antenna, switchable to amplifying antenna.
Size: 94x160x31,5 mm

upp

Control units

KeyTx - Wireless control unit

Function
Can be adapted for e.g. lighting control, motor control, etc. Also available with tele-TB.
To be ordered.

Technical specification
Radio frequency: 433.920 MHz
Protection: IP-65 (does not apply to a device with tele-TB)
Size: 63x140x30 mm

upp

Accessories

Non-contact activation key

Function
Non-contact activation key for activating and verifying components of the TermoSense® system. Various functions are achieved by holding the activation key differently for the relevant component.

Technical specification
Size: 55x26x5 mm

upp

Antenna with BNC connector

Function
Antennas suitable for Base Station, Repeater, Alarm Receiver, TempCTL Temperature Sensor, etc. The foldable antenna can be used to gain distance/angle from disturbing metal objects or to, for example, buses fold down the antenna to a position that does not disturb the driver's field of view.

Technical specification
Antenna connector: Type BNC
Lengths: 205, 214 and 340 mm, of which the middle one is foldable (0 °, 45 ° or 90 °).

upp

We reserve the right to make technical changes.
© 2019 SensiNet AB